The Monprene CP-18200 Unfilled, High Flow Series of thermoplastic elastomer compounds, with good UV resistance, available in NAT or colors, from 40 to 80 Shore A, are designed specifically for EU consumer product applications requiring a soft, rubber-like feel. Monprene CP-18280 is a medium hardness, low density grade that is suitable for injection molding.
基本信息
特性
Low Specific Gravity
Without Fillers
低密度
抗紫外线性能良好
良好的成型性能
良好的柔韧性
良好的着色性
良好粘结性
流动性高
耐化学性良好
韧性良好
中等硬度
用途
把手
包覆成型
插头
衬套
垫圈
垫圈
皮箱
柔软触感应用
柔软的把手
通用
橡胶取代
消费品应用领域
旋钮
RoHS 合规性
RoHS 合规
外观
半透明
可用颜色
形式
粒子
加工方法
注射成型
物理性能
额定值
单位制
测试方法
密度
0.890
g/cm³
ISO 1183
硬度
额定值
单位制
测试方法
肖氏硬度 (邵氏 A, 5 秒)
80
ISO 868
弹性体
额定值
单位制
测试方法
拉伸应力
ISO 37
100%应变
3.90
MPa
ISO 37
300%应变
4.80
MPa
ISO 37
抗张强度 (断裂)
6.70
MPa
ISO 37
伸长率 (断裂)
500
%
ISO 37
压缩永久变形
ISO 815
23°C, 22 hr
39
%
ISO 815
70°C, 22 hr
62
%
ISO 815
充模分析
额定值
单位制
测试方法
表观粘度 (200°C, 206 sec^-1)
101
Pa·s
ISO 11443
法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.
注射
额定值
单位制
料筒后部温度
120 到 160
°C
料筒中部温度
160 到 230
°C
料筒前部温度
180 到 230
°C
射嘴温度
180 到 230
°C
加工（熔体）温度
180 到 230
°C
模具温度
15 到 50
°C
注射速度
快速
背压
0.500 到 1.50
MPa
螺杆转速
50 到 100
rpm
垫层
3.00 到 25.0
mm
注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 65°C (150°F).Low holding pressure is recommended
